+6012 382 9224, +60123193932 chchan@agridon-manufacturers.com

Spray drying of INSOLUBLE solids (>50μm) with high fat content at 60-70% moisture content. Agridon Technologies’s technology does not require fat separation for pre-treatment of feed, thus:

  • Reducing risk of product turning rancid.
  • Improved product throughput and productivity.

As particle sizes are small (high surface area per unit volume), Biot number is less than 0.1 thus drying properties are bulk heat and mass transfer limited, i.e. determined by the behaviour of bulk air temperature, velocity, and turbulence. Our spray drying chamber (primary collection unit) collects powder at average diameter of 290μm, and median diameter of 180μm. Our auxiliary cyclone (secondary collection unit) collects powder at average diameter of 113μm, and median diameter of 55μm.

Powder (Insoluble solids)