by Chian Wen | Aug 1, 2018 | Commercialisation, Evaporator, Innovation, Percolator, Process innovation, SME engineering, Spray dryer
We successfully designed commissioned turnkey herbal extraction commercial plant at Kota Damansara. 1) Top left: ultrasound assisted extractive reactor and percolators. 2) Top right: evaporator for increasing solid content in solution. 3) Bottom left: Hot water kettle...
by Chian Wen | May 18, 2018 | Commercialisation, Herbal extraction, Innovation, Process innovation, SME engineering
Introduction From the year 2007 to year 2013, global added value for high-value manufacturing has dropped by 0.2% (from 0.8% to 0.6%) while National Biotechnology Policy wants to enable biotechnology to contribute to 5% of the nation’s GDP by 2020. In order to...
by Chian Wen | Apr 26, 2018 | Petrochemical, Process innovation, SME engineering
Two-component polyurea systems typically do not contain any solvent or Volatile Organic Compounds (VOC). They are known for a very rapid dry time of less than 30 seconds without the use of a catalyst as in the two-component polyurethane systems. This rapid dry time is...
by Chian Wen | Mar 28, 2018 | Edible Bird's Nest (EBN), Innovation, Process innovation, SME engineering
Edible bird’s nest (EBN), also known as swiftlet’s nest, has been used for centuries whether as a tonic or health food in countries around Asia-Pacific. Swiftlets are small insectivorous birds which can be found throughout Southeast Asia and the South Pacific. ...
by Chian Wen | Feb 22, 2018 | Agglomeration, Commercialisation, Encapsulation, Innovation, Process innovation, SME engineering
Fluid bed agglomerator by Agridon Technologies Sdn Bhd to increase the dissolution rate of Arabic gum by agglomerating and encapsulating the arabic gum powder. Powder before and after treatment (encapsulation and agglomeration):
by Chian Wen | Feb 12, 2018 | Commercialisation, Innovation, Insoluble solids, Process innovation, SME engineering, Spray dryer
Spray drying of INSOLUBLE solids (>50μm) with high fat content at 60-70% moisture content. Agridon Technologies’s technology does not require fat separation for pre-treatment of feed, thus: Reducing risk of product turning rancid. Improved product throughput and...
Recent Comments